Pro Forge Upper Control Arms Suited For 2005+ Toyota Tacoma

The Ironman 4x4 upper control arms (UCAs) are engineered for the Tacoma to directly replace the OEM UCAs.

Ironman 4x4 upper control arms are forged with 4 degrees of caster correction for ideal wheel alignment, correcting the vehicle’s geometry back to OEM specs, generating outstanding performance and ride quality.

The Pro Forge UCAs feature drop forged construction resulting in improved strength to weight ratios, increased directional strength with reduced stress concentrations in corners and filets. The precision of drop forging consistently results in superior in strength, weight savings, and manufacturing tolerances when compared to machined, rolled, or other cast processes.

Wrapped in a hardened zinc coating, these UCA’s have up to 75% more corrosion resistance when compared to traditional paint or powder coating. This zinc coating provides maximum effectiveness at warding off the oxidation that typically leads to rust and corrosion.

We use OEM style ball joints and bushings that are tested and manufactured to strict Japanese specifications that are readily available at every dealership and parts store. They feature a fully hardened stud bound in a watertight sealed machined housing which doesn’t allow for contaminates to be introduced into the joint with grease guns or outside environment.

These feature packed control arms when paired with our suspension kits translate into unmatched off-road performance, and on-road ride quality for your rig.

Specifications

• Pro Forge Technology – Improved strength to weight ratio, with Increased directional strength reduced stress concentrations in corners and filets Increased strength and weight savings compared to machined, rolled, or cast parts
• Optimize Wheel Alignment at Raised Ride Height
• More Clearance for Larger Tires and Increased Lift
• Drop forged construction – 6082 T6 Drop Forged Alloy Construction. Zero tolerance manufacturing process compared to rolled steel and tubular constructions
• Hardened zinc coating – 75% more corrosion resistance over tradition paint or powder coating
• Built in 4 degrees of caster – for optimal wheel alignment, resetting the vehicle’s geometry to OEM specs.
• Optimize Wheel Alignment at Raised Ride Height
• High Strength and Durability
• Sealed ball joint – doesn’t allow for contaminates to be introduced to the joint through a dirty grease gun.
• OEM spec ball joints and bushings – tested and manufactured to strict Japanese specifications, with parts available at every dealership and parts store
• Manufactured in and conforms to Australian Design Rules (ADR)
• Kit is sold as a pair

WHEEL & TIRE FITMENT INFO: Factory Wheels & Tires: Yes Aftermarket Wheels & Tires: 16" or larger wheels with max 4.75" back space

Installation

 View Instruction Sheet

Warranty